Sisältökirjasto
CRA (Base)
Article 12: Products with digital elements classified as high-risk AI systems

Vaatimuksen kuvaus

1. Without prejudice to the requirements relating to accuracy and robustness set out in Article 15 of Regulation (EU) 2024/1689, products with digital elements which fall within the scope of this Regulation and which are classified as high-risk AI systems pursuant to Article 6 of that Regulation shall be deemed to comply with the cybersecurity requirements set out in Article 15 of that Regulation where:<7p>

  • those products fulfil the essential cybersecurity requirements set out in Part I of Annex I;
  • the processes put in place by the manufacturer comply with the essential cybersecurity requirements set out in Part II of
  • the achievement of the level of cybersecurity protection required under Article 15 of Regulation (EU) 2024/1689 is demonstrated in the EU declaration of conformity issued under this Regulation.

2. For the products with digital elements and cybersecurity requirements referred to in paragraph 1 of this Article, the relevant conformity assessment procedure provided for in Article 43 of Regulation (EU) 2024/1689 shall apply. For the purposes of that assessment, notified bodies which are competent to control the conformity of the high-risk AI systems under Regulation (EU) 2024/1689 shall also be competent to control the conformity of high-risk AI systems which fall within the scope of this Regulation with the requirements set out in Annex I to this Regulation, provided that the compliance of those notified bodies with the requirements laid down in Article 39 of this Regulation has been assessed in the context of the notification procedure under Regulation (EU) 2024/1689.

3. By way of derogation from paragraph 2 of this Article, important products with digital elements as listed in Annex III to this Regulation, which are subject to the conformity assessment procedures referred to in Article 32(2), points (a) and (b), and Article 32(3) of this Regulation and critical products with digital elements as listed in Annex IV to this Regulation which are required to obtain a European cybersecurity certificate pursuant to Article 8(1) of this Regulation or, absent that, which are subject to the conformity assessment procedures referred to in Article 32(3) of this Regulation, and which are classified as high-risk AI systems pursuant to Article 6 of Regulation (EU) 2024/1689, and to which the conformity assessment procedure based on internal control as referred to in Annex VI to Regulation (EU) 2024/1689 applies, shall be subject to the conformity assessment procedures provided for in this Regulation in so far as the essential cybersecurity requirements set out in this Regulation are concerned.

Manufacturers of products with digital elements as referred to in paragraph 1 of this Article may participate in the AI regulatory sandboxes referred to in Article 57 of Regulation (EU) 2024/1689.

Kuinka täyttää vaatimus

CRA (Base)

Article 12: Products with digital elements classified as high-risk AI systems

Tehtävän nimi
Prioriteetti
Tila
Teema
Politiikka
Muut vaatimukset
No items found.

Politiikkaan sisältyviä tietoturvatehtäviä

Tehtävän nimi
Prioriteetti
Tila
Teema
Politiikka
Muut vaatimukset
No items found.

Autamme täyttämään vaatimukset tehokkaasti Universal cyber compliance language -teknologialla

Digiturvamallissa kaikki vaatimuskehikkojen vaatimukset kohdistetaan universaaleihin tietoturvatehtäviin, jotta voitte muodostaa yksittäisen suunnitelman, joka täyttää ison kasan vaatimuksia.

Tietoturvakehikoilla on yleensä yhteinen ydin. Kaikki kehikot kattavat perusaiheita, kuten riskienhallinnan, varmuuskopioinnin, haittaohjelmat, henkilöstön tietoisuuden tai käyttöoikeuksien hallinnan omissa osioissaan.
Digiturvamallin "universal cyber compliance language" -teknologia luo teille yksittäisen suunnitelman ja varmistaa, että kehikkojen yhteiset osat tehdään vain kerran. Te voitte keskittyä suunnitelman toteuttamiseen, me automatisoimme compliance-osan - nykyisiä ja tulevia vaatimuksia päin.
Aloita ilmainen kokeilu
Tutustu Digiturvamalliin
Aloita ilmainen kokeilu
Digiturvamallin avulla rakennat tietoturvallisen ja halutut vaatimukset täyttävän organisaation. Halusitko kehittää tietoturvan hallintaa yleisesti, raportoida omasta NIS2-valmiudesta tai hankkia ISO 27001 -sertifioinnin, Digiturvamalli yksinkertaistaa koko prosessia.
AI-pohjaiset parannussuositukset ja käyttäjäystävällinen työkalu varmistavat, että organisaationne voi olla luottavainen vaatimusten täyttymisestä ja keskittyä oman tietoturvan jatkuvaan parantamiseen.
Selkeä suunnitelma vaatimusten täyttämiseen
Aktivoi teille tärkeät vaatimuskehikot ja jalkauta niiden vaatimukset täyttäviä selkeitä toimenpiteitä.
Uskottavat raportit todisteiksi hyvästä tietoturvasta
Etene tehtävien avulla varmistaaksesi turvallisen toiminnan. Luo ammattimaisia ​​raportteja muutamalla napsautuksella.
AI-avusteiset parannussuositukset
Keskity vaikuttavimpiin parannuksiin Digiturvamallin suositusten avulla.